Load Balancing Mikrotik PCC dengan PPPoe

Mikrotik tutorial Load Balance Mikrotik with PCC using PPPoe-Client connection is used for bandwitdh optimalization,fail over, and bandwidth control usage.

First, make new mangle for mark connectio, packet and routing :
/ ip firewall mangle
add chain=input in-interface=internet1 action=mark-connection new-connection-mark=internet1_conn
add chain=input in-interface=internet2 action=mark-connection new-connection-mark=internet2_conn
add chain=output connection-mark=internet1_conn action=mark-routing new-routing-mark=to_internet1 
add chain=output connection-mark=internet2_conn action=mark-routing new-routing-mark=to_internet2
add chain=prerouting dst-address-type=!local in-interface=Local per-connection-classifier=both-addresses:2/0 \
action=mark-connection new-connection-mark=internet1_conn passthrough=yes
add chain=prerouting dst-address-type=!local in-interface=Local per-connection-classifier=both-addresses:2/1 \
action=mark-connection new-connection-mark=internet2_conn passthrough=yes
add chain=prerouting connection-mark=internet1_conn in-interface=Local action=mark-routing new-routing-mark=to_internet1
add chain=prerouting connection-mark=internet2_conn in-interface=Local action=mark-routing new-routing-mark=to_internet2

Than set the default route and fail over gateway :
/ ip route
add dst-address=0.0.0.0/0 gateway=10.111.0.1 routing-mark=to_internet1 check-gateway=ping
add dst-address=0.0.0.0/0 gateway=10.112.0.1 routing-mark=to_internet2 check-gateway=ping
add dst-address=0.0.0.0/0 gateway=10.111.0.1 distance=1 check-gateway=ping
add dst-address=0.0.0.0/0 gateway=10.112.0.1 distance=2 check-gateway=ping

Last, set the NAT for local connection:
/ ip firewall nat
add chain=srcnat out-interface=internet1 action=masquerade
add chain=srcnat out-interface=internet2 action=masquerade

That is simple script for Load Balance Mikrotik with PCC using PPPoe-Client connection.